• Floating Channel Designed for Bootstrap Operation up to 600V
• Tolerant to Negative Transient Voltages; dV/dt Immune
• Undervoltage Lockout
• 3.3V, 5V, and 12V Input Logic Compatible
• Open-Drain FAULT Indicator Pin Shows Over-Current Shutdown
• Output in Phase with the Input

IX2127 (Data Sheet) The IX2127 is a high-voltage, high-speed power MOSFET and IGBT driver. High-voltage level-shift circuitry enables this device to operate up to 600V. Clare’s proprietary common-mode design techniques provide stable operation in high dV/dt noise environments. An on-board comparator can be used to detect an over-current condition in the driven MOSFET or IGBT device, and then shut down drive to that device. An open-drain output, /FAULT, indicates that an over-current shutdown has occurred.

The gate driver output typically can source 250mA and sink 500mA, which is suitable for fluorescent lamp ballast, motor control, SMPS, and other converter drive topologies.

MX6895: -550 Volt Full Bridge Gate Driver

• Full Bridge Gate Driver
• Internal High-Voltage Level-Shift Function
• Negative 550V Lamp Supply Voltage
• 3V to 12V CMOS Logic Compatible
• External Dead Time Control
• 8V to 12V Input Supply Voltage
• No External Bootstrap Capacitors

MX6895 (Data Sheet) features our high voltage integrated circuit (HVIC) technology integrating high and low side N-channel power MOSFET drivers in a full bridge configuration. The circuit is intended as a commutator for High Intensity Discharge (HID) lamps such as those used in vehicle headlamps, outdoor street lighting, multimedia projectors, retail accent lighting, and warehouse lighting.